Problems with 2073N

Discussions for BiPAC Homplug products: P106N, P106R2, 2073N, 2074..etc
Post Reply
Posts: 1
Joined: Sun Feb 05, 2012 7:51 am

Problems with 2073N

Post by ralphb » Sun Feb 05, 2012 7:56 am

Hi all,

Not sure if anyone else has had this issue.
2073N has been working fine in my network for years.

Now all of a sudden it has dropped the WLAN light and fails to connect.
It seems to be stuck in an authentication loop, as it gets connection to router, then immediately disconnects.

Anyone any ideas.
Tried reset, seems to make it work for a little while but then reverts to previous behavior.

Posts: 5272
Joined: Tue Jul 19, 2011 4:30 pm

Re: Problems with 2073N

Post by billion_fan » Tue Feb 07, 2012 3:32 pm

Please check the WLAN light on the front of the 2073N, to see if the light is lit.

If the light is not lit, then it seems your 2073N is suffering from a wireless/hardware failure.

Also you can try and connect a ethernet cable to the 2073N and see if the connection disconnects and reconnects constantly.

The PLC tells you it is synced and talking to the other homeplug, if light is on, then you can test the ethernet connection.

Post Reply