Page 2 of 3
Re: Bipac 7800N Firmware 1.06H
Posted: Tue Feb 19, 2013 7:55 am
by davidmweston
billion_fan wrote:davidmweston wrote:Does this fix the blank DHCP issue (where the whole table disappears a few hours after reset)?
Thx.
How long does it take for your device/s to disappear from the DHCP table??
It takes a few hours only.
D
Re: Bipac 7800N Firmware 1.06H
Posted: Tue Feb 19, 2013 11:27 am
by billion_fan
davidmweston wrote:billion_fan wrote:davidmweston wrote:Does this fix the blank DHCP issue (where the whole table disappears a few hours after reset)?
Thx.
How long does it take for your device/s to disappear from the DHCP table??
It takes a few hours only.
D
We are investigating this issue with our engineers
Re: Bipac 7800N Firmware 1.06H
Posted: Sat Feb 23, 2013 5:43 pm
by whulfcastle
Hi,
In the release notes it mentions a PPTP VPN change/fix? I still cannot browse the internet if I VPN into the router from my phone or another PC. By the looks of things DNS is not working for VPN clients. I can only browse if I use a websites IP address.
Is this issue going to be fixed in this release?
Thanks.
Re: Bipac 7800N Firmware 1.06H
Posted: Mon Feb 25, 2013 11:50 am
by billion_fan
whulfcastle wrote:Hi,
In the release notes it mentions a PPTP VPN change/fix? I still cannot browse the internet if I VPN into the router from my phone or another PC. By the looks of things DNS is not working for VPN clients. I can only browse if I use a websites IP address.
Is this issue going to be fixed in this release?
Thanks.
The 7800N will not pass DNS servers over the VPN tunnel, the only option is to turn off sending traffic over the tunnel or set static DNS servers to your VPN tunnel on the client device
Re: Bipac 7800N Firmware 1.06H
Posted: Tue Mar 12, 2013 9:56 am
by dog-man
Can I just confirm that this firmware is ok for fibre with sky?
I am currently using 1.06g (I think)
dog-man
Re: Bipac 7800N Firmware 1.06H
Posted: Tue Mar 12, 2013 10:29 am
by billion_fan
dog-man wrote:Can I just confirm that this firmware is ok for fibre with sky?
I am currently using 1.06g (I think)
dog-man
This firmware is working fine for Sky ADSL and Sky FTTC
Re: Bipac 7800N Firmware 1.06H
Posted: Tue Mar 12, 2013 10:54 am
by dog-man
Thank you.
Dare I ask if there is any difference between 1.06.g and this version?
dog-man
Re: Bipac 7800N Firmware 1.06H
Posted: Tue Mar 12, 2013 3:06 pm
by billion_fan
dog-man wrote:Thank you.
Dare I ask if there is any difference between 1.06.g and this version?
dog-man
If you download the firmware from the start of this thread, there will be release notes within the zipped file.
Re: Bipac 7800N Firmware 1.06H
Posted: Tue Apr 16, 2013 10:32 pm
by sWi7zLe
Have to say that this version has been driving me round the bend since i installed it!
I upgraded to 1.06h a few weeks back, ready for going from O2 DSL to Plusnet Fibre and ever since, every computer connected as had to wait about 30 seconds to a minute after reaching the desktop to be able to go online!
You may say that its due to slow computers, but mine is very high end and connected directly via cat6, and I had to wait wait at least 30 seconds.
I have been considering plugging in the Plusnet router...really didn't want to!
Today I went back to 1.06g and this problem has vanished.
Also, wireless kept vanishing for no reason. I had the it set to WPA2
Oddly i do seem to be getting a slightly slow speed of about 2Mb/s via 1.06g but thats a small price to pay to get rid of this annoying issue
Re: Bipac 7800N Firmware 1.06H
Posted: Fri May 24, 2013 10:25 pm
by Aps_pete
Hi all,
On both 1.06g or h the blanking of the dhcp addresses assigned table happens, also there is a hang up in routing where the router just stops passing data between the Ewan and the LAN. Only a restart fixes this.
I am not using a adsl so it's not connected with any broadband provider and I can still see the Internet connected and working on the Ewan side on my Internet provider.
Can any one provide any clues.
Thanks in advance
Pete