BiPAC 7800N beta firmware for SKY (1483MER) NOW WORKING!
Posted: Thu Apr 05, 2012 1:47 pm
It has taken us a while but we now have a beta firmware for 7800N that has been tested working with Sky broadband. Sky unlike most UK ISPs uses 1483MER encapsulation and to make it more difficult, they have slightly modified it and therefore the long wait. Information from Skyuser forum was the key and we couldn't have done it without them. Also many thanks to those customers who help us out either by giving us the right information or help out with the testing.
This is currently a working beta release and a offical one should follow in few weeks time.
If you find any connection problem with this firmware, please feel free to report it. But for this firmware we are Only interested in connection related issue and nothing else.
Here are the steps:
1) Login to 7800N via Http.
2) Upgrade the beta firmware
3) Restart to the Factory Default Settings
4) Please choose the protocol as MPoA (RFC1483/RFC2684, Multiprotocol Encapsulation over AAL5)
5) Please enter VCI / VPI as 0/40
5) Please input the client ID as username and password separate with "|" e.g. username|password
Regards,
Admin
This is currently a working beta release and a offical one should follow in few weeks time.
If you find any connection problem with this firmware, please feel free to report it. But for this firmware we are Only interested in connection related issue and nothing else.
Here are the steps:
1) Login to 7800N via Http.
2) Upgrade the beta firmware
3) Restart to the Factory Default Settings
4) Please choose the protocol as MPoA (RFC1483/RFC2684, Multiprotocol Encapsulation over AAL5)
5) Please enter VCI / VPI as 0/40
5) Please input the client ID as username and password separate with "|" e.g. username|password
Regards,
Admin