Page 1 of 1
Latest Firmware...?
Posted: Thu Oct 20, 2016 10:17 am
by stevebez
Hi guys 7800N with Sky Fibre and firmware 1.06g.dc1- is this the latest firmware for FTTC?
If not what are the changes to the latest firmware and where can I get it ?
Lastly, is it possible to set MTU settings in the 7800 to jumbo (9000) ?
Re: Latest Firmware...?
Posted: Thu Oct 20, 2016 1:18 pm
by billion_fan
stevebez wrote:Hi guys 7800N with Sky Fibre and firmware 1.06g.dc1- is this the latest firmware for FTTC?
If not what are the changes to the latest firmware and where can I get it ?
Lastly, is it possible to set MTU settings in the 7800 to jumbo (9000) ?
Latest firmware that supports Sky Fibre can be found here
http://www.billion.uk.com/esupport/inde ... 0n-106hdt2
The switch part of the 7800N supports jumbo frames 9KB MTU, see my test results, two PC's with jumbo frames enabled, ping test
Re: Latest Firmware...?
Posted: Thu Oct 20, 2016 1:42 pm
by stevebez
Many thanks ... installed although could not spot any obvious changes ... ?
Also do you leave the WAN MTU at 1500 for best practice?