Hi everyone,
I recently upgraded my LinkSys DG834GT to a 7300n & connected it to the main PC (windows 7) which happens to be at one end of quite a long ground floor flat. The 7300n setup was very smooth and I've not had any problems whatsoever when it comes to the wired connection to the PC. The issue I have had was that for the laptop (windows 7) and iPad that are being exclusively used at the very other end of the flat, the 7300n just hasn't been able to deliver a wifi network that was up to the job. At the wireless end of the flat, the connection was iffy to say the least, with frequent drop-outs or failed connections. I'm tied to where I can put the 7300n due to space and wiring constraints, and therefore thought boosting the signal might be the way forward.
I purchased a 3100sn and followed the setup for it using the instruction manual, and after many false starts have managed to get a connection at the wireless end of the house. The problem I'm having is that the wireless connection to the 3100sn is very problematic. I can connect to it on the laptop and iPad, and all the network tools show a connection to the internet, however there is an intermittent issue with the DNS server. Either internet connection is fantastic via the 3100sn, or the internet keeps throwing up DNS server lookup failures.
I've read the many threads over at the Australian Billion forums and searched the forums here, but there doesn't seem to be many people with the same problem.
I have made sure that...
- Both the 7300n & 3100sn are using the same channel (6 in this case as I'm surrounded by networks using channel 11).
Both the 7300n & 3100sn are using the same security mode (WPA2) and key.
The 3100sn is in AP Client mode.
WDS is on.
WPS is disabled.
Both 7300n & 3100sn have different SSIDs so that I can pick the better signal.
Both have up-to-date firmware (7300n 1.08a & 3100sn 1.06k-c)
John