Accessing GUI on 8900-ax2400

Discussions for BiPAC 8900 series: 8900AX-1600, 8900AX-2400, 8900X
Post Reply
nozzer
Posts: 40
Joined: Wed Jul 20, 2011 4:34 pm

Accessing GUI on 8900-ax2400

Post by nozzer »

I am using the above router in bridge mode and have a tp-link mesh attached to it. Since setting it up I can't access the 8900 GUI GUI any more, so is there a way to get at it directly from a mesh router, or maybe using a laptop connected to the bridge? Or is it a matter of doing a reset? If there is a written procedure could someone point me to it please?

Thanks in advance.
billion_fan
Posts: 5374
Joined: Tue Jul 19, 2011 4:30 pm

Re: Accessing GUI on 8900-ax2400

Post by billion_fan »

nozzer wrote: Wed Dec 14, 2022 6:06 pm I am using the above router in bridge mode and have a tp-link mesh attached to it. Since setting it up I can't access the 8900 GUI GUI any more, so is there a way to get at it directly from a mesh router, or maybe using a laptop connected to the bridge? Or is it a matter of doing a reset? If there is a written procedure could someone point me to it please?

Thanks in advance.
You need to connect directly the to 8900 with a static IP set on your LAN card, within the same range of the router

eg

PC LAN - 192.168.1.100
Billion Router - 192.168.1.254

Once set you can then login to the device on its IP address.
nozzer
Posts: 40
Joined: Wed Jul 20, 2011 4:34 pm

Re: Accessing GUI on 8900-ax2400

Post by nozzer »

Thankyou. Thumbs up!
Post Reply