Post Office Fibre
Posted: Thu Feb 20, 2020 6:51 pm
Hi just a quick question The Post Office Connection Is Set Up Like B.T. Internet eg
1. Reset the unit back to factory default settings
2. Login to device on http://192.168.1.254
3. Use the username 'admin' and password 'admin' to login
4. Click on' Configuration >> WAN'
5. Edit the PTM >> PPPOE profile
6. Ensure the '802.1Q VLAN ID' is set to 101 and the '802.1P Priority' is set to 0
7. Enter the username 'bthomehub@btinternet.com' and the password 'BT' (case sensitive)
8. Click on 'Apply'
9. Check to see if the internet LED turns 'green'
But is the The username and password different is standard like B.T. does anyone no what it is or is it user defined
Many thanks
1. Reset the unit back to factory default settings
2. Login to device on http://192.168.1.254
3. Use the username 'admin' and password 'admin' to login
4. Click on' Configuration >> WAN'
5. Edit the PTM >> PPPOE profile
6. Ensure the '802.1Q VLAN ID' is set to 101 and the '802.1P Priority' is set to 0
7. Enter the username 'bthomehub@btinternet.com' and the password 'BT' (case sensitive)
8. Click on 'Apply'
9. Check to see if the internet LED turns 'green'
But is the The username and password different is standard like B.T. does anyone no what it is or is it user defined
Many thanks